Uzbekistan Digital Health Platform - Integrations
0.10.0 - draft Uzbekistan bayroqcha

This page is part of the Uzbekistan Digital Health Platform - Integrations (v0.10.0: Releases Draft) based on FHIR (HL7® FHIR® Standard) v5.0.0. This is the current published version. For a full list of available versions, see the Directory of published versions

Resurss profili: Sick Leave Related Person - Batafsil ta’riflar

Draft 2026-09-30 holatiga ko‘ra

sick-leave-related-person resurss profili uchun ta’riflar

Guidance on how to interpret the contents of this table can be foundhere

0. RelatedPerson
Definition

Information about a person that is involved in a patient's health or the care for a patient, but who is not the target of healthcare, nor has a formal responsibility in the care process.

ShortA person that is related to a patient, but who is not a direct target of care
Control0..*
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().ofType(canonical) | %resource.descendants().ofType(uri) | %resource.descendants().ofType(url))) or descendants().where(reference = '#').exists() or descendants().where(ofType(canonical) = '#').exists() or descendants().where(ofType(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
dom-6: A resource should have narrative for robust management (text.`div`.exists())
dom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().ofType(canonical) | %resource.descendants().ofType(uri) | %resource.descendants().ofType(url))) or descendants().where(reference = '#').exists() or descendants().where(ofType(canonical) = '#').exists() or descendants().where(ofType(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
dom-6: A resource should have narrative for robust management (text.`div`.exists())
2. RelatedPerson.implicitRules
Definition

A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

ShortA set of rules under which this content was created
Comments

Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of its narrative along with other profiles, value sets, etc.

Control0..1
Typeuri
Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies its meaning or interpretation
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
4. RelatedPerson.contained
Definition

These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, nor can they have their own independent transaction scope. This is allowed to be a Parameters resource if and only if it is referenced by a resource that provides context/meaning.

ShortContained, inline Resources
Comments

This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags in their meta elements, but SHALL NOT have security labels.

Control0..*
This element is affected by the following invariants: dom-2, dom-4, dom-3, dom-5
TypeResource
Is Modifierfalse
Must Supportfalse
Summaryfalse
Alternate Namesinline resources, anonymous resources, contained resources
6. RelatedPerson.extension
Definition

An Extension


May be used to represent additional information that is not part of the basic definition of the resource. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortExtensionAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Must Supportfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on RelatedPerson.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
  • value @ url
  • 8. RelatedPerson.extension:birthdate
    Slice Namebirthdate
    Definition

    Date of birth of the related person

    ShortBirthdate of Related Person
    Control0..1
    TypeExtension(Birthdate of Related Person) (Extension Type: date)
    Is Modifierfalse
    Must Supporttrue
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    10. RelatedPerson.modifierExtension
    Definition

    May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

    ShortExtensions that cannot be ignored
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
    Must Supportfalse
    Summarytrue
    Requirements

    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

    Alternate Namesextensions, user content
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    12. RelatedPerson.active
    Definition

    Whether this related person record is in active use.

    ShortWhether this related person's record is in active use
    Comments

    This element is labeled as a modifier because it may be used to mark that the resource was created in error.

    Control0..1
    Typeboolean
    Is Modifiertrue because This element is labelled as a modifier because it is a status element that can indicate that a record should not be treated as valid
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supportfalse
    Summarytrue
    Requirements

    Need to be able to mark a related person record as not to be used, such as if it was created in error.

    Meaning if MissingThis resource is generally assumed to be active if no value is provided for the active element
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    14. RelatedPerson.patient
    Definition

    The patient this person is related to.

    ShortThe patient this person is related to
    Control1..1
    TypeReference(Patient)
    Is Modifierfalse
    Must Supportfalse
    Summarytrue
    Requirements

    We need to know which patient this RelatedPerson is related to.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    16. RelatedPerson.name
    Definition

    A name associated with the person.

    ShortFull name of the related personA name associated with the person
    Control10..1*
    TypeHumanName
    Is Modifierfalse
    Must Supporttrue
    Summarytrue
    Requirements

    Related persons need to be identified by name, but it is uncommon to need details about multiple other names for that person.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    18. RelatedPerson.gender
    Definition

    Administrative Gender - the gender that the person is considered to have for administration and record keeping purposes.

    Shortmale | female | other | unknown
    Control0..1
    BindingThe codes SHALL be taken from AdministrativeGenderhttp://hl7.org/fhir/ValueSet/administrative-gender|5.0.0
    (required to http://hl7.org/fhir/ValueSet/administrative-gender|5.0.0)

    The gender of a person used for administrative purposes.

    Typecode
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supporttrue
    Summarytrue
    Requirements

    Needed for identification of the person, in combination with (at least) name and birth date.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    20. RelatedPerson.gender.extension
    Definition

    An Extension


    May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

    ShortExtensionAdditional content defined by implementations
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifierfalse
    Summaryfalse
    Alternate Namesextensions, user content
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    SlicingThis element introduces a set of slices on RelatedPerson.gender.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
    • value @ url
    • 22. RelatedPerson.gender.extension:otherGender
      Slice NameotherGender
      Definition

      Extension for more precise differentiation of the administrative gender 'other', aligned with German base profiles representation of the same concept.

      ShortDifferentiation of the administrative gender 'other'
      Control0..1
      TypeExtension(Differentiation of the administrative gender 'other') (Extension Type: Coding)
      Is Modifierfalse
      Must Supporttrue
      Summaryfalse
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())

      Guidance on how to interpret the contents of this table can be foundhere

      0. RelatedPerson
      2. RelatedPerson.extension
      SlicingThis element introduces a set of slices on RelatedPerson.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
      • value @ url
      • 4. RelatedPerson.extension:birthdate
        Slice Namebirthdate
        Control0..1
        TypeExtension(Birthdate of Related Person) (Extension Type: date)
        Must Supporttrue
        6. RelatedPerson.name
        ShortFull name of the related person
        Control1..1
        Must Supporttrue
        8. RelatedPerson.gender
        Must Supporttrue
        10. RelatedPerson.gender.extension
        SlicingThis element introduces a set of slices on RelatedPerson.gender.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
        • value @ url
        • 12. RelatedPerson.gender.extension:otherGender
          Slice NameotherGender
          Control0..1
          TypeExtension(Differentiation of the administrative gender 'other') (Extension Type: Coding)
          Must Supporttrue

          Guidance on how to interpret the contents of this table can be foundhere

          0. RelatedPerson
          Definition

          Information about a person that is involved in a patient's health or the care for a patient, but who is not the target of healthcare, nor has a formal responsibility in the care process.

          ShortA person that is related to a patient, but who is not a direct target of care
          Control0..*
          Is Modifierfalse
          Must Supportfalse
          Summaryfalse
          Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
          dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().ofType(canonical) | %resource.descendants().ofType(uri) | %resource.descendants().ofType(url))) or descendants().where(reference = '#').exists() or descendants().where(ofType(canonical) = '#').exists() or descendants().where(ofType(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
          dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
          dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
          dom-6: A resource should have narrative for robust management (text.`div`.exists())
          2. RelatedPerson.id
          Definition

          The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.

          ShortLogical id of this artifact
          Comments

          Within the context of the FHIR RESTful interactions, the resource has an id except for cases like the create and conditional update. Otherwise, the use of the resouce id depends on the given use case.

          Control0..1
          Typeid
          Is Modifierfalse
          Must Supportfalse
          Summarytrue
          4. RelatedPerson.meta
          Definition

          The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource.

          ShortMetadata about the resource
          Control0..1
          TypeMeta
          Is Modifierfalse
          Must Supportfalse
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          6. RelatedPerson.implicitRules
          Definition

          A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

          ShortA set of rules under which this content was created
          Comments

          Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of its narrative along with other profiles, value sets, etc.

          Control0..1
          Typeuri
          Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies its meaning or interpretation
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Must Supportfalse
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          8. RelatedPerson.language
          Definition

          The base language in which the resource is written.

          ShortLanguage of the resource content
          Comments

          Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).

          Control0..1
          BindingThe codes SHALL be taken from AllLanguages
          (required to http://hl7.org/fhir/ValueSet/all-languages|5.0.0)

          IETF language tag for a human language

          Typecode
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Must Supportfalse
          Summaryfalse
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          10. RelatedPerson.text
          Definition

          A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety.

          ShortText summary of the resource, for human interpretation
          Comments

          Contained resources do not have a narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later.

          Control0..1
          This element is affected by the following invariants: dom-6
          TypeNarrative
          Is Modifierfalse
          Must Supportfalse
          Summaryfalse
          Alternate Namesnarrative, html, xhtml, display
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          12. RelatedPerson.contained
          Definition

          These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, nor can they have their own independent transaction scope. This is allowed to be a Parameters resource if and only if it is referenced by a resource that provides context/meaning.

          ShortContained, inline Resources
          Comments

          This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags in their meta elements, but SHALL NOT have security labels.

          Control0..*
          This element is affected by the following invariants: dom-2, dom-4, dom-3, dom-5
          TypeResource
          Is Modifierfalse
          Must Supportfalse
          Summaryfalse
          Alternate Namesinline resources, anonymous resources, contained resources
          14. RelatedPerson.extension
          Definition

          An Extension

          ShortExtension
          Control0..*
          TypeExtension
          Is Modifierfalse
          Must Supportfalse
          Summaryfalse
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          SlicingThis element introduces a set of slices on RelatedPerson.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
          • value @ url
          • 16. RelatedPerson.extension:birthdate
            Slice Namebirthdate
            Definition

            Date of birth of the related person

            ShortBirthdate of Related Person
            Control0..1
            TypeExtension(Birthdate of Related Person) (Extension Type: date)
            Is Modifierfalse
            Must Supporttrue
            Summaryfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            18. RelatedPerson.modifierExtension
            Definition

            May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

            Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

            ShortExtensions that cannot be ignored
            Comments

            There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

            Control0..*
            TypeExtension
            Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
            Must Supportfalse
            Summarytrue
            Requirements

            Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

            Alternate Namesextensions, user content
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            20. RelatedPerson.identifier
            Definition

            Identifier for a person within a particular scope.

            ShortA human identifier for this person
            Comments

            RelatedPerson identifiers might not be unique across instances within a system, as a single human individual may be represented as many different RelatedPerson resources with different roles, periods, or relationships.

            NoteThis is a business identifier, not a resource identifier (see discussion)
            Control0..*
            TypeIdentifier
            Is Modifierfalse
            Must Supportfalse
            Summarytrue
            Requirements

            People are known by a variety of ids. Some institutions maintain several, and most collect identifiers for exchange with other organizations concerning the patient. Examples are national person identifier and local identifier.

            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            22. RelatedPerson.active
            Definition

            Whether this related person record is in active use.

            ShortWhether this related person's record is in active use
            Comments

            This element is labeled as a modifier because it may be used to mark that the resource was created in error.

            Control0..1
            Typeboolean
            Is Modifiertrue because This element is labelled as a modifier because it is a status element that can indicate that a record should not be treated as valid
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Must Supportfalse
            Summarytrue
            Requirements

            Need to be able to mark a related person record as not to be used, such as if it was created in error.

            Meaning if MissingThis resource is generally assumed to be active if no value is provided for the active element
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            24. RelatedPerson.patient
            Definition

            The patient this person is related to.

            ShortThe patient this person is related to
            Control1..1
            TypeReference(Patient)
            Is Modifierfalse
            Must Supportfalse
            Summarytrue
            Requirements

            We need to know which patient this RelatedPerson is related to.

            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            26. RelatedPerson.relationship
            Definition

            The nature of the relationship between the related person and the patient.

            ShortThe relationship of the related person to the patient
            Comments

            The directionality of the relationship is from the RelatedPerson to the Patient. For example, if the Patient is a child, and the RelatedPerson is the mother, the relationship would be PRN (parent) or MTH (mother).

            Control0..*
            BindingThe codes SHOULD be taken from PatientRelationshipType
            (preferred to http://hl7.org/fhir/ValueSet/relatedperson-relationshiptype|5.0.0)

            The nature of the relationship between a patient and the related person.

            TypeCodeableConcept
            Is Modifierfalse
            Must Supportfalse
            Summarytrue
            Requirements

            We need to know the relationship with the patient since it influences the interpretation of the information attributed to this person.

            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            28. RelatedPerson.name
            Definition

            A name associated with the person.

            ShortFull name of the related person
            Control1..1
            TypeHumanName
            Is Modifierfalse
            Must Supporttrue
            Summarytrue
            Requirements

            Related persons need to be identified by name, but it is uncommon to need details about multiple other names for that person.

            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            30. RelatedPerson.telecom
            Definition

            A contact detail for the person, e.g. a telephone number or an email address.

            ShortA contact detail for the person
            Comments

            Person may have multiple ways to be contacted with different uses or applicable periods. May need to have options for contacting the person urgently, and also to help with identification.

            Control0..*
            TypeContactPoint
            Is Modifierfalse
            Must Supportfalse
            Summarytrue
            Requirements

            People have (primary) ways to contact them in some way such as phone, email.

            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            32. RelatedPerson.gender
            Definition

            Administrative Gender - the gender that the person is considered to have for administration and record keeping purposes.

            Shortmale | female | other | unknown
            Control0..1
            BindingThe codes SHALL be taken from AdministrativeGender
            (required to http://hl7.org/fhir/ValueSet/administrative-gender|5.0.0)

            The gender of a person used for administrative purposes.

            Typecode
            Is Modifierfalse
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Must Supporttrue
            Summarytrue
            Requirements

            Needed for identification of the person, in combination with (at least) name and birth date.

            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            34. RelatedPerson.gender.id
            Definition

            unique id for the element within a resource (for internal references)

            Shortxml:id (or equivalent in JSON)
            Control0..1
            Typestring
            Is Modifierfalse
            XML FormatIn the XML format, this property is represented as an attribute.
            Summaryfalse
            36. RelatedPerson.gender.extension
            Definition

            An Extension

            ShortExtension
            Control0..*
            TypeExtension
            Is Modifierfalse
            Summaryfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            SlicingThis element introduces a set of slices on RelatedPerson.gender.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
            • value @ url
            • 38. RelatedPerson.gender.extension:otherGender
              Slice NameotherGender
              Definition

              Extension for more precise differentiation of the administrative gender 'other', aligned with German base profiles representation of the same concept.

              ShortDifferentiation of the administrative gender 'other'
              Control0..1
              TypeExtension(Differentiation of the administrative gender 'other') (Extension Type: Coding)
              Is Modifierfalse
              Must Supporttrue
              Summaryfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
              40. RelatedPerson.gender.value
              Definition

              Primitive value for code

              ShortPrimitive value for code
              Control0..1
              Typecode
              Is Modifierfalse
              XML FormatIn the XML format, this property is represented as an attribute.
              Summaryfalse
              42. RelatedPerson.birthDate
              Definition

              The date on which the related person was born.

              ShortThe date on which the related person was born
              Control0..1
              Typedate
              Is Modifierfalse
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Must Supportfalse
              Summarytrue
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              44. RelatedPerson.address
              Definition

              Address where the related person can be contacted or visited.

              ShortAddress where the related person can be contacted or visited
              Control0..*
              TypeAddress
              Is Modifierfalse
              Must Supportfalse
              Summarytrue
              Requirements

              Need to keep track where the related person can be contacted per postal mail or visited.

              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              46. RelatedPerson.photo
              Definition

              Image of the person.

              ShortImage of the person
              Control0..*
              TypeAttachment
              Is Modifierfalse
              Must Supportfalse
              Summaryfalse
              Requirements

              Many EHR systems have the capability to capture an image of persons. Fits with newer social media usage too.

              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              48. RelatedPerson.period
              Definition

              The period of time during which this relationship is or was active. If there are no dates defined, then the interval is unknown.

              ShortPeriod of time that this relationship is considered valid
              Comments

              If an individual has a relationship with a patient over multiple, non-adjacent periods, there should be a distinct RelatedPerson instance for each period. For example, if a person is a roommate for a period of time, moves out, and is later a roommate with the same person again, you would have two RelatedPerson instances.

              Control0..1
              TypePeriod
              Is Modifierfalse
              Must Supportfalse
              Summaryfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              50. RelatedPerson.communication
              Definition

              A language which may be used to communicate with the related person about the patient's health.

              ShortA language which may be used to communicate with the related person about the patient's health
              Comments

              If no language is specified, this implies that the default local language is spoken. If you need to convey proficiency for multiple modes, then you need multiple RelatedPerson.Communication associations. If the RelatedPerson does not speak the default local language, then the Interpreter Required Standard can be used to explicitly declare that an interpreter is required.

              Control0..*
              TypeBackboneElement
              Is Modifierfalse
              Must Supportfalse
              Summaryfalse
              Requirements

              If a related person does not speak the local language, interpreters may be required, so languages spoken and proficiency is an important things to keep track of both for patient and other persons of interest.

              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              52. RelatedPerson.communication.id
              Definition

              Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

              ShortUnique id for inter-element referencing
              Control0..1
              This element is affected by the following invariants: ele-1
              Typestring
              Is Modifierfalse
              XML FormatIn the XML format, this property is represented as an attribute.
              Summaryfalse
              54. RelatedPerson.communication.extension
              Definition

              May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

              ShortAdditional content defined by implementations
              Comments

              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

              Control0..*
              TypeExtension
              Is Modifierfalse
              Summaryfalse
              Alternate Namesextensions, user content
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
              56. RelatedPerson.communication.modifierExtension
              Definition

              May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

              Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

              ShortExtensions that cannot be ignored even if unrecognized
              Comments

              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

              Control0..*
              TypeExtension
              Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
              Summarytrue
              Requirements

              Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

              Alternate Namesextensions, user content, modifiers
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
              58. RelatedPerson.communication.language
              Definition

              The ISO-639-1 alpha 2 code in lower case for the language, optionally followed by a hyphen and the ISO-3166-1 alpha 2 code for the region in upper case; e.g. "en" for English, or "en-US" for American English versus "en-AU" for Australian English.

              ShortThe language which can be used to communicate with the related person about the patient's health
              Comments

              The structure aa-BB with this exact casing is one the most widely used notations for locale. However not all systems actually code this but instead have it as free text. Hence CodeableConcept instead of code as the data type.

              Control1..1
              BindingThe codes SHALL be taken from AllLanguages
              (required to http://hl7.org/fhir/ValueSet/all-languages|5.0.0)

              IETF language tag for a human language

              TypeCodeableConcept
              Is Modifierfalse
              Must Supportfalse
              Summaryfalse
              Requirements

              Most systems in multilingual countries will want to convey language. Not all systems actually need the regional dialect.

              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              60. RelatedPerson.communication.preferred
              Definition

              Indicates whether or not the related person prefers this language (over other languages he or she masters up a certain level).

              ShortLanguage preference indicator
              Comments

              This language is specifically identified for communicating healthcare information.

              Control0..1
              Typeboolean
              Is Modifierfalse
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Must Supportfalse
              Summaryfalse
              Requirements

              People that master multiple languages up to certain level may prefer one or more, i.e. feel more confident in communicating in a particular language making other languages sort of a fall back method.

              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))